Kitchen Backsplashes / September 14, 2018 / Davian Wilson.
There are many different metals available for you to choose from when creating a backsplash. Besides the stainless steel shown for this project, there are also aluminum and copper tiles which come in many styles, designs, and finishes. If you have finally decided what kind of metal tile you will use and the wall look you want to achieve, go for it. To make the installation as perfect as possible, be sure to turn off power in the kitchen to avoid accidents with live wires and go easy on the amount of glue you use. Let the applied tiles dry for a few hours before using the stove or oven, and then prepare to enjoy your newly decorated kitchen.
If you are the proud owner of a small apartment with a very small kitchen space, fear not because there are incredible simple solutions which will make the area look good while keeping it functional. The biggest issue with small kitchen spaces can be a claustrophobic feeling, but there are a few tricks you can use to make it look bigger and brighter. As the image shows, adding a mirror backsplash over this stove caused the light to double by reflecting the window from across the room.
This next backsplash does resemble one we described earlier, but the stones used are a different size and are installed using a very different technique. These little stones cost around $2.50 per square foot so expensive is not part of the equation. If you want to do this or something similar, the effort required for this DIY project is less than you might expect to create the finished wall you see here. Apply the required grout carefully to the wall area, smoothing it over the entire surface. Then take each irregular shaped sheet of small stones and place it on the grouted wall, setting each sheet so the stones eventually cover the entire wall in an interlocking pattern. Voila, the garden stone kitchen backsplash is now ready.
Ever considered simply painting your backsplash without actually using anything else? You can pretty much create any pattern and design you want. In this case, a herringbone pattern was chosen. To make something similar, you need a lot of tape. Decide on a size for your painted tiles. Then make tiny pencil marks on the wall to know where the grout lines should go. After that, make the horizontal lines and start taping and painting. It’s tricky and you need lots of spare time for a project like this but it’s also really original.
You MightAlso Like
Ours Editor Picks ofThe Week