Kitchen / September 5, 2018 / Edward Taylor
Countertops are typically fabricated from 14- or 16-gauge material, which is then glued to a substrate of plywood or medium-density fiberboard (MDF) to form a rigid surface. Type 304 stainless steel is commonly used, due to its higher chromium content (and therefore corrosion resistance) and ability to be welded without affecting its durability or strength. Most common is a number 4 brushed finish, but stainless steel is also available in satin (smooth), antique matte and any number of specialty patterns.
This next backsplash does resemble one we described earlier, but the stones used are a different size and are installed using a very different technique. These little stones cost around $2.50 per square foot so expensive is not part of the equation. If you want to do this or something similar, the effort required for this DIY project is less than you might expect to create the finished wall you see here. Apply the required grout carefully to the wall area, smoothing it over the entire surface. Then take each irregular shaped sheet of small stones and place it on the grouted wall, setting each sheet so the stones eventually cover the entire wall in an interlocking pattern. Voila, the garden stone kitchen backsplash is now ready.
You MightAlso Like