Kitchen Backsplashes / September 5, 2018 / Davian Wilson
Ever considered simply painting your backsplash without actually using anything else? You can pretty much create any pattern and design you want. In this case, a herringbone pattern was chosen. To make something similar, you need a lot of tape. Decide on a size for your painted tiles. Then make tiny pencil marks on the wall to know where the grout lines should go. After that, make the horizontal lines and start taping and painting. It’s tricky and you need lots of spare time for a project like this but it’s also really original.
This next backsplash does resemble one we described earlier, but the stones used are a different size and are installed using a very different technique. These little stones cost around $2.50 per square foot so expensive is not part of the equation. If you want to do this or something similar, the effort required for this DIY project is less than you might expect to create the finished wall you see here. Apply the required grout carefully to the wall area, smoothing it over the entire surface. Then take each irregular shaped sheet of small stones and place it on the grouted wall, setting each sheet so the stones eventually cover the entire wall in an interlocking pattern. Voila, the garden stone kitchen backsplash is now ready.
You MightAlso Like
Ours Editor Picks ofThe Week