Kitchen / September 6, 2018 / Edward Taylor
Tired of the same old tiled backsplashes? Try something different like a herringbone shim backsplash. Cut the shims to size and then create the middle section starting at the center line. Glue down the section and let it sit for several hours. Then, once you apply it onto the wall, you can start adding all the filler pieces. It’s important to measure correctly.
Stick with a standard run of cabinets. Above the lower cabinets, there’s usually a run of upper cabinets, sometimes with a tall cabinet at one or both ends. Your exhaust fan and housing (if applicable) are also located in this run. The cabinetry may stretch the full length of the wall.
You MightAlso Like